This paper describes the development of Ka band microwave filters on silicon substrates based on micromachining techniques and multiple wafer stacking. On this concept a 4th order pseudo elliptic Ka band filter based on TEM mode resonators was designed from which test structures have been derived to allow at the same time the technology development on simpler structures and to test the key element of the filter, i.e. the resonator. Measured results show a quality factor of the single resonator of 500 and frequency shifts as good as 0,1%. Compact size filters with excellent RF performance seem to be within the reach of this technology.

3D Micromachined Ka (30 GHz) Band RF MEMS Filter for On-Board Satellite Communication Systems

Qureshi, Abdul Qader Ahsan;Colpo, Sabrina;Giacomozzi, Flavio;Margesin, Benno
2014-01-01

Abstract

This paper describes the development of Ka band microwave filters on silicon substrates based on micromachining techniques and multiple wafer stacking. On this concept a 4th order pseudo elliptic Ka band filter based on TEM mode resonators was designed from which test structures have been derived to allow at the same time the technology development on simpler structures and to test the key element of the filter, i.e. the resonator. Measured results show a quality factor of the single resonator of 500 and frequency shifts as good as 0,1%. Compact size filters with excellent RF performance seem to be within the reach of this technology.
2014
9789732724385
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11582/239226
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
social impact